# Ring doorbell not detecting motion? Fixes for night, Home mode and after charging

_Oct 23, 2026 · Paymahn Moghadasian_

_Fixes checked against Ring's help articles on Oct 23, 2026. Ring Appstore figures are from Ring's public Appstore data, 30-day window ending Oct 23, 2026, read by Pubstoop the same day._

If your Ring doorbell isn't detecting motion, check these first, in this order. Is the doorbell online? Is Motion Detection turned on? Is a Mode or Motion Schedule switching it off at certain times? Are your motion zones and sensitivity covering the area people walk through? Then look at battery settings and Wi-Fi signal. Ring says an offline device "will not detect motion," and on a new device the protective film over the front also stops it from detecting motion ([Using Motion Detection](https://ring.com/support/articles/q986o/using-motion-detection)).

## First: is it missing motion, or missing alerts?

Open Event History and look for a recording at the time you expected one. Ring says that if there's a recording but you didn't get an alert, you may need to turn on Motion Alerts. If there's no recording at all, the doorbell didn't register the motion. Keep in mind that recording needs a Ring subscription, so without one, Event History won't settle it.

If it's an alert problem, Ring's [notification troubleshooting article](https://ring.com/support/articles/vll73/troubleshooting-notifications-from-ring) lists the usual causes: Ring Alerts, Motion Detection or Motion Alerts switched off for the device, a Motion Schedule, alerts snoozed, Focus or Do Not Disturb on your phone, a VPN, or alerts going to a smartwatch instead of your phone.

## Motion Detection is off, or the doorbell is offline

Motion Detection has to be on for the doorbell to detect and record anything. To check, open the Ring app, tap the menu (☰), tap Devices, tap the doorbell, and toggle Motion Detection on. The device's online status is on the main dashboard. If it's offline, reconnect it before changing anything else ([Ring](https://ring.com/support/articles/q986o/using-motion-detection)).

## Motion zones don't cover the right area

Motion Zones limit detection to the parts of the view you draw. If a zone leaves out the path or porch, motion there won't count. Per Ring's [Motion Zones article](https://ring.com/support/articles/85pqb/Using-Camera-Motion-Zones), you can have up to three zones per device. To edit them, open the Ring app, tap the menu (☰), tap Devices, tap the doorbell, then Device Settings > Motion Settings > Edit Zones.

What else Ring says matters here:

- On battery-powered devices, you may need to turn on Advanced Motion Detection to use Motion Zones.
- Windows, mirrors and other reflective surfaces in view can affect motion detection.
- Privacy Zones block areas from being recorded. Make sure one isn't covering the area you want watched.
- Some devices have Bird's Eye Zones, which you can also adjust or turn off.

## Sensitivity and other motion settings

Go to menu (☰) > Devices > your doorbell > Motion Settings. From Ring's [Using Motion Detection](https://ring.com/support/articles/q986o/using-motion-detection):

- **Motion Sensitivity.** The slider sets detection range. Lowering it cuts false alerts, and Ring says "if your device is missing motion events, try increasing Motion Sensitivity."
- **Motion Wizard.** Tap the magic wand icon in the top right to be walked through the settings.
- **Smart Alerts.** These help the doorbell pick out people, vehicles, packages and other objects. They need a Ring subscription.
- **Position.** Ring recommends mounting doorbells 48 inches (1.22 m) from the ground. Mounted too high or too low, they "may encounter inconsistent motion detection" ([Positioning doorbells and security cameras](https://ring.com/support/articles/88ix9/Positioning-doorbells-and-security-cameras)).

## Not detecting motion at night

Ring doesn't have a night-only motion setting, so night problems usually come from something that changes at night:

- **A Motion Schedule.** Ring's schedule names include "Night Time." While a schedule is active, motion is still recorded but alerts aren't sent, and a clock icon shows on the device dashboard. Check menu (☰) > Devices > your doorbell > Device Settings > Motion Settings > Motion Schedules ([Setting up Motion Schedules](https://ring.com/support/articles/v4wro/Setting-up-Motion-Schedules)).
- **A Mode you switch to at night.** If you set Home at bedtime and the doorbell isn't set to record in Home, it won't capture motion overnight. See the next section.
- **Reflections and glass.** In full darkness, Ring cameras switch to black-and-white infrared video ([Night Vision](https://ring.com/support/articles/83hut/Night-Vision-in-Ring-devices)). Ring says reflective surfaces can affect motion detection, and that a camera facing a window or other glass can have trouble with motion detection and video quality. Ring also says some Indoor, Stick Up and Outdoor Cams can turn off their infrared light when they face a window.
- **Color Night Vision on older devices.** On some earlier Ring models you can switch Color Night Vision on or off (Devices > your device > Device Settings > Video Settings). Ring says it "adds color to video in low light for improved clarity and motion detection."
- **Cold.** Batteries drain faster in the cold, according to Ring's [battery article](https://ring.com/support/articles/9iatk/troubleshooting-battery-performance), so a battery doorbell can run low sooner in winter.

## Home mode turned motion off

Ring's Modes are Disarmed, Home and Away. For each Mode you choose what each doorbell and camera does, and for doorbells the options include whether it records. Ring's example is having only outdoor cameras record in Home and every camera record in Away ([Using Device Modes](https://ring.com/support/articles/p0klz/Controlling-Your-Ring-Devices-with-Modes)). If the doorbell is set not to record in Home, it won't capture motion while you're in Home mode.

To check or change it, open the Ring app, tap the menu (☰), tap Devices, tap the doorbell, tap Mode Settings, pick the Mode, and set the doorbell's action. To rule Modes out completely, tap Disable Modes on the same screen and trigger a test. Ring's motion article suggests the same test: "If you have Modes enabled for your device, go to Mode Settings to disable it, then test a motion event."

If other people in the house can change Modes, someone else may have switched it. The owner controls that under menu (☰) > Settings > Modes > Shared user Access.

## After charging, or running on battery

**After you recharge.** Ring's [charging article](https://ring.com/support/articles/r2r57/charging-ring-doorbell) says to slide the battery back in until it clicks, reattach the faceplate until it clicks, put the security screws back, and wait up to 60 seconds for the doorbell to power on. A full charge can take up to 10 hours from a USB source of at least 1 amp. If your battery percentage doesn't change after charging, Ring says to make sure the battery is clicked fully into place. Then open Device Health: if Network shows Offline, reconnect Wi-Fi, because "even if your battery is charged, your doorbell or camera won't work unless it's connected to wifi" ([Ring](https://ring.com/support/articles/9iatk/troubleshooting-battery-performance)). Once it's back online, check that Motion Detection is still on and trigger a test.

**Battery-saving settings.** Battery doorbells have settings that trade detection for battery life. If you changed them to save power, they may be why motion gets missed:

- **Motion Frequency** (under Advanced Settings). Frequently keeps motion detection always on (shortest battery life). Regularly takes a short break after each motion alert. Periodically takes a longer break. Ring's advice for missed events is to set it to Frequently.
- **Advanced Motion Detection** (under Advanced Settings). Ring says battery devices may need it on "to get the most accuracy."
- **Low battery tips.** When a battery doorbell drops below 30%, the Ring app shows a low battery warning, and its battery tips point you to Snapshot Capture Frequency, Motion Frequency and Advanced Motion Detection to save power ([Low Battery Notifications](https://ring.com/support/articles/hof51/Learn-About-Low-Battery-Notifications)). Turning those down saves battery but can mean missed motion.

To see what's using power, open menu (☰) > Devices > your doorbell > Power Settings.

## Weak Wi-Fi (RSSI)

Ring says poor Wi-Fi signal "can prevent Ring devices from performing optimal motion detection." To check signal strength, open the Ring app, tap the menu (☰), tap Devices, tap the doorbell, tap Device Settings, tap the Device Health tile, and look at Signal Strength. Ring grades RSSI like this ([Understanding wifi recommendations](https://ring.com/support/articles/92bd2/Understanding-wifi-recommendations-for-Ring-devices)):

| RSSI | Ring's rating | What it means |
| --- | --- | --- |
| 0 to -60 | Great | Strong |
| -60 to -70 | Okay | Could be improved |
| -70 to -80 | Poor | Possible delays and interruptions |
| -80 or worse | Very poor | Intermittent service or going offline |

Ring's fixes are to move the doorbell closer to the router, add a Chime Pro, or use a mesh network. Brick, stucco, metal, mirrors, glass doors and nearby electronics all weaken the signal. A weak connection can also drain the battery faster, because the doorbell may keep losing its connection and reconnecting.

If none of this helps, you can reboot the doorbell from Device Health (Reboot This Device), which Ring suggests for problems including inaccurate notifications ([Device Health](https://ring.com/support/articles/1irvs/Device-Health-Ring-App)).

## Can a Ring Appstore app detect motion better?

Not if the doorbell isn't detecting it. Ring says "most of the integrations rely on motion detection or doorbell events" and asks you to keep motion detection on before connecting an app ([Ring Appstore help](https://ring.com/support/articles/e2sg9/Ring-appstore-third-party-integrations)). What these apps can do is make sense of the events Ring does catch: alerts for specific things, fewer alerts for familiar faces or cars, or a warning when a doorbell goes offline. Fix detection in the Ring app first.

| App | What the listing says it does | Price | Free trial | Clicks · 30 days | Accounts linked · 30 days |
| --- | --- | --- | --- | ---: | ---: |
| [Cam Uptime Alerts](/apps/0mpfxjwpxbr43w8snzbwg/) | Alerts when a doorbell or camera goes offline and when it's back | Free (up to 5 devices) | — | 9,707 | 1,761 |
| [Driveway Alert](/apps/ik261y2gzeebypg75mnof/) | Recognizes your family's cars and alerts on unknown cars at night | $4.99 / month / device | 7 days | 1,034 | 37 |
| [Vitecso](/apps/xgt9l7cab0lnigermf0ax/) | Alerts for events you describe in plain English | $5 / month / device | 14 days | 524 | 19 |
| [StrangerAlert](/apps/ff1fcixziuyplewc8wrzy/) | Daily visit summaries where familiar faces stay quiet and strangers stand out | $3.99 / month / device | 30 days | 522 | 33 |
| [Eagle Eye](/apps/dd36sgp54qm7qyuzicdxh/) | Custom alerts you describe, plus a timeline of camera activity | $4.99 / month / device | 7 days | 365 | 8 |

Requirements from the listings:

- **Cam Uptime Alerts** says it reads online and offline status only. That's useful here because an offline doorbell detects nothing.
- **Driveway Alert** needs an outdoor camera, a Ring Protect subscription with motion alerts on, and is US-only.
- **Eagle Eye** needs a camera "with motion detection enabled" and primary owner access.
- **StrangerAlert** isn't available for cameras in Illinois or Texas.

All Appstore apps need a Ring subscription and the primary account owner to connect them. What each one asks to access is on Pubstoop's [access page](/permissions/).

**What the numbers are.** Clicks · 30 days is Ring's published count of clicks on the app's store listing in the 30-day window ending Oct 23, 2026. It isn't installs. Accounts linked · 30 days is Ring's published count of accounts linked to the app in the same window, and a linked account isn't necessarily a paying subscriber. Current figures for every app are in the [catalog](/).

## Sources

- Ring Help, read Oct 23, 2026: [Using Motion Detection](https://ring.com/support/articles/q986o/using-motion-detection); [Using Camera Motion Zones](https://ring.com/support/articles/85pqb/Using-Camera-Motion-Zones); [Setting up Motion Schedules](https://ring.com/support/articles/v4wro/Setting-up-Motion-Schedules); [Using Device Modes](https://ring.com/support/articles/p0klz/Controlling-Your-Ring-Devices-with-Modes); [Night Vision in Ring devices](https://ring.com/support/articles/83hut/Night-Vision-in-Ring-devices); [Positioning doorbells and security cameras](https://ring.com/support/articles/88ix9/Positioning-doorbells-and-security-cameras); [Charging your Ring doorbell](https://ring.com/support/articles/r2r57/charging-ring-doorbell); [Troubleshooting battery performance](https://ring.com/support/articles/9iatk/troubleshooting-battery-performance); [Low Battery Notifications](https://ring.com/support/articles/hof51/Learn-About-Low-Battery-Notifications); [Understanding wifi recommendations](https://ring.com/support/articles/92bd2/Understanding-wifi-recommendations-for-Ring-devices); [Checking Device Health](https://ring.com/support/articles/1irvs/Device-Health-Ring-App); [Troubleshooting notifications](https://ring.com/support/articles/vll73/troubleshooting-notifications-from-ring); [Ring Appstore and third-party app integrations](https://ring.com/support/articles/e2sg9/Ring-appstore-third-party-integrations).
- Ring Appstore public catalog data, `https://ring.com/appstore/api/apps`, read Oct 23, 2026. Fields used: app name, descriptions, features, technical details, `billing.plans`, `trial.duration_days`, and `biMetrics` (`clickUsers30d`, `accountLinkingUsers30d`, `windowEndDate`). Ring's 30-day window ends Oct 23, 2026.

_Pubstoop is a personal, unofficial site that tracks the public Ring Appstore. It is not affiliated with Ring or Amazon and has nothing to sell._